Warband Showcase: Mollog’s Mob

Don’t be green with envy.

You’ll have already seen glimpses of my Mollog’s Mob in Tournament Round-Up 20 but the reason it took me a while to play them at an event was to paint them! Although I strive to get my warbands painted for events, that’s had to take a backseat for my Age of Sigmar army. So today I’ll go over how I painted my Troggoth and his friends.

There were no conversions this time so it was just a matter of painting. I started off with colour theory. For my warbands they must have 2 core things: green and yellow desert bases. Due to this I wanted Mollog and the Bat Squig green with toxic green smoke for the Spiteshroom. The Stalasquig had no green…because it’s a rock. I wanted red to be a spot colour and Mollog’s mushrooms would be mostly the same colour of red or white so it doesn’t distract from the miniature too much. I also always use a colour wheel to decide what colours to use as well as complement each other. So basically bright but deep green, bright yellow bases and purple for inner skin and tongues.

Mollog is a big boi so I painted him in sub-assemblies. Namely the body, head, big mushrooms and base all painted separately. Every other miniature was painted fully assembled. I then sprayed everything with grey primer via a can.

The skin was done first. I began by spraying Mollog and the Bat Squig were basecoated with Scale 75 Forest Green via my airbrush. Next these were highlighted with a mix of Scale 75 Forest Green and Scale 75 Greenskin Flesh via zenithal highlighting. Then I sprayed pure Scale 75 Greenskin Flesh as a further highlight and did a final spot highlight of Scale 75 Greenskin Flesh mixed with Scale 75 Spring Green. Finally I did a recess wash of Coelia Greenshade mixed with Lahmium Medium into the recesses.

The Spiteshroom’s smoke was painted the same way as above but I bascially drybrushed black then grey lightly at the top of the smoke plumes. I then recess washed with the green colours in thin glazes.

Bases were done in my standard mix. Basecoat Zandri Dust, wash Casandora Yellow and drybrush with Ushabti Bone. Quick but effective.

Mollog’s club was basecoated with Dryad Bark then washed with Agrax Earthshade. This was highlighted with Dryad Bark and then Gorthor Brown as a final highlight.

Mollog’s spores were painted with a base of Rakarth Flesh then washed with Druchii Violet mixed with Lahmium Medium. I then lightlight highlighted with Rakarth Flesh and edge highlighted the openings of the spores with Palid Wych Flesh.

Mushroom stems, white mushrooms and the Spiteshroom were basecoated with Rakarth Flesh then shaded with Seraphim Sepia. I highlighted with Rakarth Flesh and then Palid Wych Flesh.

The red mushrooms and eyes were basecoated with Mephiston Red and washed with Carroburg Crimson. I highlighted with Mephiston Red and then Evil Sunz Scarlet.

Yellow spots and fungi were basecoated with Averland Sunset then washed with Seraphim Sepia. I highlighted with Averland Sunset and then Yriel Yellow.

Fingernails and teeth were basecoated with XV-88, washed Agrax Earthshade, highlighted with Zamesi Desert then Ushabti Bone.

Tongues and skin flaps were basecoated with Vallejo Game Air Hexed Lichen. Once dry I shaded with Druchii Violet. I highlighted with a mix of Hexed Lichen and Scale 75 Sunset Purple. Then I highlighted with pure Sunset Purple and then did a fine edge highlight of Sunset Purple mixed with Ushabti Bone.

Orange fungi was based with Jakero Orange and washed with Fuegan Orange. I then highlighted with Jakero Orange and a fine highlight of Ushabti Bone.

Brown fur was basecoated with Rhinox Hide and washed in Agrax Earthshade. Next I highlighted with Rhinox Hide, Doombull Brown, Zamesi Desert then Ushabti Bone. As this was fur each step was done quite lightly, almost like feathering and drybrushing combined together.

The frog was basecoated in Vallejo Game Air Imperial Blue. This was washed with Drakenhof Nightshade. I highlighted with a mix of Imperial Blue and Valljeo Model Air Light Sea Blue. This was done in a few steps, each time adding more Light Sea Blue until the final highlight was a 25%/75% mix. I researched poisonous blue frogs for this. I also hate painting blue.

Black leather was painted with Vallejo Model Colour Black. Then it was highlighted with a mix of black and Vallejo Panzer Aces Periscopes, then a pure fine highlight of Periscopes.

Metal was basecoated with Vallejo Model Air Gun and washed Nuln Oil then Agrax Earthshade. This was highlighted with Vallejo Model Air Steel.

Gold was basecoated with Retributor Armour, washed Agrax Earthshade, highlighted with Retributor Armour then Vallejo Model Air Steel.

Skulls were basecoated with Ushabti Bone. After a wash of Agrax Earthshade, I highlighted with Ushabti Bone then Scale 75 White.

Mollog’s lip was basecoated with Rakarth Flesh, done in a feathered pattern. Then I feathered over Scale 75 Pale Flesh. I finished this off with a thinned down glaze of Carroburg Crimson.

The swampy water was basecoated with Caliban Green. Once dry I painted areas with watered down Rhinox Hide. While still wet, I added in watered down Caliban Green randomly and mixed the colours together roughly. Once dry I used a few thin layers of Games Workshop Water Effects. Note the water effects were done after varnishing.

With all the painting done, I glued Mollog together then varnished everything with Vallejo Polyurethane Gloss Varnish via my airbrush then did a layer of Vallejo Polyurethane Matte Varnish via my airbrush once the gloss coat was dry. This just makes the miniatures a lot tougher for being regularly handled and also allows me to do oil washes after the gloss coat. Here are the finished models close up:

Overall this was a quicker attempt for me at getting miniatures done. I normally do a lot more edge highlighting and layers but I kept it simple for speed and relied more on the airbrush to get the skin transitions done strongly. I really like the end result and will be going forward with this style of painting for gaming projects, my super detailed style just isn’t time efficient.

Hopefully you enjoyed my painting adventure. I have so many colours now that I kinda just pick colours to paint with on the fly so it’s always a bit different each time. Remember, painted models roll more crits!

2 thoughts on “Warband Showcase: Mollog’s Mob

Leave a Reply to John Cancel reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s